The 5 Simple Ways To Care For Your Garden Tools

It’s funny how we tend to be somewhat concerned and reasonable when planning to buy new garden tools. At this point, that’s when you will find most of us searching for the latest information about the best garden tools available in the market. We even go ahead and buy some of those garden tools which have a fancy look and expensive since we want a tool that will always be effective when put to work.

Unfortunately, we tend to forget very quickly and care less about some of these tools, which at some point we invested heavy on. This is evident in how we just throw some of these garden tools after using them. We don’t even take time to clean, repair sharpen or store them properly. To most of us, these garden tools only become useful when we want to use them.

Any seasoned gardener will tell you for sure that caring for a garden tool is the only way you can be able to maintain its efficiency in work, extend its durability, reduce weed seeds and pathogen spread, and also improve on your safety. These are some of the simple ways to care for your garden tools;

1. Always Clean Your Tools After Use

This is one of the core management aspects that has always been a problem for most of us but also one of the simplest tools care routine. Cleaning can simply be done through hosing down your spade or just wiping sap off your secateurs by use of a lag. Cleaning your hand tools will only take a few seconds, and this way, you will be able to keep your tools in good condition and ensure you don’t compromise on their workability.

A seasoned gardener will even go ahead to use some of the recommended detergents in the tools cleaning process. Lava Soap® has been found to contain magical ingredients that helps in eliminating all forms of dirt from your garden tools. May it be sap, glue, paint, grease, or any other thing which is hard to clean off from the surface of your garden tools this detergent will do it all.

2. Store Your Garden Tools In A Protected And Dry Area

Cleaning alone will note safe your tool. But if you can manage to clean them and then store your gardening tools in a dry place, the better. This way, you will be able to keep them away from adverse weather conditions, which might accelerate the rate of rusting, which will, in turn, compromise on their durability.

Also, where possible, try to keep your garden tools off the ground surface, especially in situations where a store lacks a concrete floor. Soil combined with moisture can be the worst enemy of your garden tools since they are the main culprits of corrosion. 

3. Grease/Oil On The Moving Parts

Continuous motion along the joints of your garden tools can significantly affect the workability of your tools if enough care is not observed. Fiction is known to cause wear and tear which in return reduce the durability of your tools. This thus calls for the use of the best lubricant which will reduce the extent of friction.

The 3-IN-ONE® Multi-Purpose Oil has been found to be the lubricant of choice and should be applied on the pivot joints and blades, especially for hard-working tools like the pruners. A perfect lubricant will not only save the moving parts but will also dissolve rust and also protect your tools from corrosion.

4. Give Your Garden Tools A Quick Sharpening

A sharp tool has been found to be much effective and efficient in work compared to a blunt one. More so, with a sharp tool, you will only require less energy to perform several tasks. Sharpening services are sometimes provided at your nearest tool store at a small fee. But if you are that seasoned gardener, then you should consider having a file with you all the time to ensure you your tools are always sharp.

Sharpening is one of the easiest tasks though most gardeners tend to ignore it, thinking it will take much of their time. For a simple garden tool, only a few passes are needed, and your tool is ready for work. After sharpening also, consider wiping your blade down with a smidge of 3-IN- ONE Multipurpose Oil, especially if you are planning to store it.

5. Avoid Neglecting Wooden Handles

 Upon the accomplishment of every task, it is advisable to take time and look at the condition of your tool’s handles, especially those which have a wooden handle to see whether they are still in a good state. Some of these garden tools which have wooden tools may include spades, forks, and loppers, among others. So if you observe signs of splintering, then consider using sandpaper to smoothen those handles. 

Application of oil using a lag has also been recommended as it helps in soaking of rough wooden handles. If a given wooden material can absorb enough oil, it becomes smooth and thus easy to use. This way, you will be able to keep your hand free from blisters, which always comes about as a result of using rough wooden handles.

As a gardener, if you can manage to observe the above tips, then be sure that your garden tools will have an extended life, and they will be easier to work with.  You can also get more info from best4 reviews. This site is dedicated to providing you with the best reviews and buying guides for some of the best home products.